The condenser is indispensable in every refrigeration heating cycle device

Update:23-03-2019
Summary:

The condenser is indispensable in every refrigeration h […]

The condenser is indispensable in every refrigeration heating cycle device. The condenser of the refrigeration heating cycle device needs to be taken care of, otherwise the performance will be degraded, so it is necessary to carry out regular maintenance.

The air-cooled condenser uses air as the cooling medium. Due to the dust in the air, some dust will adhere to the outer surface of the condenser fin. After a long time, the heat dissipation effect of the condenser will be deteriorated, especially The environment is harsh, so it should be cleaned regularly.

Cleaning method: pure dust can be blown clean with compressor air, etc. If there is more dirt, clean the heat pipe and fins with non-corrosive cleaning agent to achieve the purpose of improving heat dissipation.

For the water-cooled condenser brand of the refrigeration heating cycle device, the problem of removing scale is mainly. The cleaning cycle depends on the water quality. The water quality is poorly cleaned at least once a year. The water quality is good and can be cleaned once every 2 to 3 years.

Cleaning method: The small water-cooled chiller is equipped with a casing type water-cooled condenser, which can be pickled. The specific operation method is as follows: the condenser is removed, the accumulated water is discharged, and 10% of the dilute sulfuric acid solution is injected into the closed state until the outlet has a solution outflow position. Dilute sulfuric acid can be released after 20~30min in the condenser. Repeat this two or three times. Finally, install the connecting pipe of the cooling water pipe and the condenser, and open the cooling water valve for 10~20min. The anti-scaling and cleaning work will end.

. The condenser of the refrigeration heating cycle device needs to be taken care of, otherwise the performance will be degraded, so it is necessary to carry out regular maintenance.

The air-cooled condenser uses air as the cooling medium. Due to the dust in the air, some dust will adhere to the outer surface of the condenser fin. After a long time, the heat dissipation effect of the condenser will be deteriorated, especially The environment is harsh, so it should be cleaned regularly.

Cleaning method: pure dust can be blown clean with compressor air, etc. If there is more dirt, clean the heat pipe and fins with non-corrosive cleaning agent to achieve the purpose of improving heat dissipation.

For the water-cooled condenser brand of the refrigeration heating cycle device, the problem of removing scale is mainly. The cleaning cycle depends on the water quality. The water quality is poorly cleaned at least once a year. The water quality is good and can be cleaned once every 2 to 3 years.

Cleaning method: The small water-cooled chiller is equipped with a casing type water-cooled condenser, which can be pickled. The specific operation method is as follows: the condenser is removed, the accumulated water is discharged, and 10% of the dilute sulfuric acid solution is injected into the closed state until the outlet has a solution outflow position. Dilute sulfuric acid can be released after 20~30min in the condenser. Repeat this two or three times. Finally, install the connecting pipe of the cooling water pipe and the condenser, and open the cooling water valve for 10~20min. The anti-scaling and cleaning work will end.

. The condenser of the refrigeration heating cycle device needs to be taken care of, otherwise the performance will be degraded, so it is necessary to carry out regular maintenance.

The air-cooled condenser uses air as the cooling medium. Due to the dust in the air, some dust will adhere to the outer surface of the condenser fin. After a long time, the heat dissipation effect of the condenser will be deteriorated, especially The environment is harsh, so it should be cleaned regularly.

Cleaning method: pure dust can be blown clean with compressor air, etc. If there is more dirt, clean the heat pipe and fins with non-corrosive cleaning agent to achieve the purpose of improving heat dissipation.

For the water-cooled condenser brand of the refrigeration heating cycle device, the problem of removing scale is mainly. The cleaning cycle depends on the water quality. The water quality is poorly cleaned at least once a year. The water quality is good and can be cleaned once every 2 to 3 years.

Cleaning method: The small water-cooled chiller is equipped with a casing type water-cooled condenser, which can be pickled. The specific operation method is as follows: the condenser is removed, the accumulated water is discharged, and 10% of the dilute sulfuric acid solution is injected into the closed state until the outlet has a solution outflow position. Dilute sulfuric acid can be released after 20~30min in the condenser. Repeat this two or three times. Finally, install the connecting pipe of the cooling water pipe and the condenser, and open the cooling water valve for 10~20min. The anti-scaling and cleaning work will end.